When peoples lives depend on your equipment there is no room for second best.
Products
Millennium Medical Products Limited provide a comprehensive range of products, systems and accessories for use in operating theatres and hospitals throughout the world.
Like all of our products and systems, our equipment is designed for reliability and maximum design life whilst being extremely cost effective and requiring minimum maintenance.
All MMPL products are hand assembled at our factory located in Denton, Greater Manchester, UK and carry the EC Declaration of Conformity CE mark.
Dental Air Plant
Millennium Medical Products Limited manufactures and supplies a comprehensive range of Dental Air Plants.
For small to medium Dental Practices MMPL would recommend a simplex or duplex system, and for a large Dental Practice or Dental Teaching Hospital MMPL would recommend a Triplex or Quadruplex system.
- All MMPL Dental Air Plants conform to the European Pharmacopoeia Standard which defines the quality of Dental Air is dry clean and bacteria free.
- European Pharmacopoeia Standard Content of Dental air
- Oxygen 20.9 ± 0.5%
- Nitrogen 78.0% by inference
- Carbon dioxide <500 ppm v/v
- Carbon monoxide <5 ppm v/v
- Oil <0.1 mg/m3
- Water < 1032 vpm (DPt –20ºC at atm p)
- Particulate Free from visible particles in a 75-litre sample (taken at 150 litres/min)
- Sulphur dioxide <1 ppm v/v
- Nitric oxide + nitrogen dioxide <2 ppm v/v
Key Features
- Fully compliant to HTM2022 Specification
- Compressors can be supplied oil lubricated or oil free type
- Flexible connections and anti-vibration mounts on all compressors
- Fail safe start up control system in the event of power loss
- Alarm and BMS Outputs for remote status indication
- All Plants tested and certified before dispatch
Dental Vacuum Plant
Laboratory Air Plant
Standard Specification
Laboratory Vacuum Plant
Veterinary Air Plant
Veterinary Vacuum Plant
Medical Gas Terminal Units Nemo Safe
Medical Gas Terminal Unit Nemo Safe designed to accept medical gas probes to the relevant British Standard. Nemo TU provides a safe source of medical gas administration from the central gas supply system to the patient. Nemo Safe terminal units manufactured from plastic material. Each gas-specific component will have the gas service marked for the purpose of safety and compliance with the standard.
Medical Gas Terminal Unit can be mounted flush or surface, and can be integrated into Bedhead Trunking systems, Headwall units or Pendants.
The MMPL Nemo Safe terminal unit are available in the following gases:
-
- O2 (Oxygen)
- N20 (Nitrous Oxide)
- ENT (Entonox)
- AIR (Medical Air)
- AIR-800 (Surgical Air)
- VAC (Vacuum)
- AGSS (Anaesthetic Gas Scavenging System)
- CO2 (Carbon Dioxide)
- N2 (Nitrogen)
Key Features
- Compact and aesthetically designed.
- 1st fix includes copper stub for ease of installation.
- Plaster shield available for flush installations.
- All 1st T.U.s are supplied with blank plug for Pipe- work 1st fix pressure testing.
- Each component indexed to ensure gas specificity is maintained.
- Quality robust materials of construction.
- Each Terminal Unit is fully tested prior to despatch.
- Proven reliability.
Medical Gas Terminal Unit Nemo XP
Medical Gas Terminal Unit Nemo XP designed to accept medical gas probes to the relevant British Standard. Nemo TU provides a safe source of medical gas administration from the central gas supply system to the patient. Nemo XP terminal units manufactured from metal making it strong and very long lasting. Each gas-specific component will have the gas service marked for the purpose of safety and compliance with the standard.
MMPL Medical Gas Terminal Unit Nemo XP can be mounted flush or surface, and can be integrated into bedhead trunking systems, headwall units or pendants.
The MMPL XP terminal unit is available in the following gases:
-
- O2 (Oxygen)
- N20 (Nitrous Oxide)
- ENT (Entonox
- AIR (Medical Air)
- AIR-800 (Surgical Air)
- VAC (Vacuum)
- AGSS (Anaesthetic Gas Scavenging System)
- CO2 (Carbon Dioxide)
- N2 (Nitrogen)
Key Features
- Compact and aesthetically designed,
- 1st fix includes copper stub for ease of installation,
- Plaster shield available for flush installations,
- Terminal Unit first fix is supplied with blank plug to enable pipework pressure testing ,
- Each component indexed to ensure gas specificity is maintained,
- Quality robust materials of construction,
- Each Terminal Unit is fully tested prior to despatch,
- Proven reliability,
Standard Specification
Degreased Lockable Line Valves
Degreased Lockable Line Valves Millennium Medical Products Limited produces and supply a complete range of Lockable Line Valves to British Standard HTM02-01. The range starts with the smallest being 15mm to the largest being 159mm. Degreased Lockable Line Valves are manufactured in accordance with Quality Management System BS EN 13485 for medical devices. The main component of a Lockable Line Valve is the Ball Valve this is used for both open and closed services. Ball valves use a ball-shaped seating element with a hole through center the same size as the pipework so there is no restriction to flow . They are quick-opening and require only a quarter-turn to open or close. A soft seat seal is used to stop the valve passing in the closed position. The body of the valve is designed to have flat faced unions on both sides this allows in the unlikely event of a failure the valve to be removed without altering the pipework. Each valve can be locked in the open or closed position using a padlock through the handles locking mechanism. Degreased Lockable Line Valves are used at the connection of the pipeline to any source of supply, at emergency inlet ports, at the pipeline entry to a building, at the pipeline exit from a building, at the connection of branches to the main pipeline run, at the connection to risers, at branches from risers to serve a number of similar departments, and upstream, downstream and in the branch connection to a ring-main.
Key Features
- Fully HTM 02-01 compliant
- Tamper proof locking mechanism that is lockable in both open and closed positions
- Can be supplied for use with pipework of 15mm to 159mm
- All valves fitted with flat faced 'o' ring unions
- Every unit is tested for pressure and tightness before dispatch
NIST Lockable Line Valves
NIST Lockable Line Valves Millennium Medical Products Limited produces and supply a complete range of Non Interchangeable Screw Thread (N.I.S.T.) Lockable Line Valves to British Standard HTM02-01. NIST Connectors are used for the purposes of pressure testing, or as a sampling point for checking the quality of the gas in the pipeline, or for back feeding from cylinders an Area that has been isolated from the main supply. The range starts with the smallest being 15mm to the largest being 159mm. NIST Lockable Line Valves are manufactured in accordance with Quality Management System BS EN 13485 for medical devices.
The main component of a NIST Lockable Line Valve is the Ball Valve, this is used for both open and closed services. Ball valves use a ball-shaped seating element with a hole through center the same size as the pipework so there is no restriction to flow . They are quick-opening and require only a quarter-turn to open or close. A soft seat seal is used to stop the valve passing in the closed position. The body of the valve is designed to have flat faced unions on both sides this allows in the unlikely event of a failure the valve to be removed without altering the pipework. Each valve can be locked in the open or closed position using a padlock through the handles locking mechanism.
All NIST Connectors have self sealing check valves and Blanking Caps. Medical Gas Valves are used at the connection of the pipeline to any source of supply, at emergency inlet ports, at the pipeline entry to a building, at the pipeline exit from a building, at the connection of branches to the main pipeline run, at the connection to risers, at branches from risers to serve a number of similar departments, and upstream, downstream and in the branch connection to a ring-main.
Key Features
- Complies fully with all relevent standards
- Fitted with BS 739 NIST connectors
- Sealed shut off NIST valves
- Uses flat faced ‘o’ ring pipeline unions
- Fitted with a lockable Handle
- Lockable in both open and closed positions
- Pressure tested prior to despatch
- Tested for tightness prior to despatch
- 12 month warranty
- Each NIST valve is supplied with blanking facility
Non-Return Valves
Millennium Medical Products Limited produces and supplies a full range of Non Return Valves
All Non Return Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.
Key Features
- Fully HTM 02-01 compliant
- Can be supplied for use with pipework of 15mm to 76mm
- Fitted with flat faced 'o' ring unions
- Every unit is tested for pressure and tightness before dispatch
AVSU
Millennium Medical Products Limited produces and supplies a full range of AVSU's.
All AVSU's are manufactured to HTM 02-01 specifications.Every unit is tested for pressure and tightness before dispatch and comes with a comprehensive warranty.
Key Features
- Fully HTM 02-01 compliant
- Fitted with BS 739 NIST connectors
- Fitted with unique laser grooved "Safe Break" window
- Fully removable door for easy access
- Can be supplied for use with pipework of 22mm 54mm
- All valves fitted with flat faced 'o' ring unions
Options
- Flush Surrounds
- Pressure Switches
- Disposable Plaster Shield
- Top or Side Entry Pipework
- Suited Key Locks
Solenoid Valves
Millennium Medical Products Limited produces and supplies a full range of Solenoid Line Valves.
All Solenoid Valves are factory tested for pressure prior to dispatch and come with a comprehensive warranty.
Key Features
- Electrically operated solenoid valve - various working voltages available
- Available in Normally Open and Normally Closed variants
- Can be supplied for use with pipework of 15mm to 54mm
- All valves fitted with flat faced 'o' ring unions
- Every unit is tested for pressure and tightness before dispatch
Athena Plant Monitoring System
The Athena Plant Monitoring System is revolutionizing the way hospital Engineers oversee and maintain critical medical gas equipment. Designed to provide comprehensive oversight, this advanced system integrates seamlessly with various components within the plant room, including the medical air plant, medical vacuum plant, medical gas manifolds, AGSS plants, and Oxygen VIE control panels.
For Hospital Engineers, the Athena Plant Monitoring System offers unparalleled convenience and efficiency. By centralizing data and control, it allows for real-time monitoring and management of all medical gas equipment from a single interface. Whether in the engineer's office or on the go, the system's compatibility with both mobile phones and computers ensures that managers can stay connected and informed at all times.
The plant room, often the heart of medical gas operations, houses critical equipment that requires constant vigilance. The Plant Monitoring System provides hospital estates department with the tools they need to ensure optimal performance and safety. By monitoring parameters such as pressure, dewpoint and operational status, the system helps prevent potential issues before they escalate, ensuring a reliable supply of medical gases.
In the engineer's office, engineers can access the data log for detailed faults and analytics, facilitating informed decision-making and proactive maintenance. The system's user-friendly interface and customizable alerts make it easy to stay on top of equipment status and performance, reducing downtime and enhancing overall efficiency.
All MMPL Medical Gas Equipment now incorporate a touch screen, human interface panel (HMI). These interactive panels can be connected to the central Athena Plant Monitoring System through a cat5 hard-wired system, ensuring there is no connection loss. The panel mimics the plant and/or manifold status whilst also being able to remotely control the plant / manifold without the requirement to visit the plant room. You will be able to view all MMPL’s plant and manifold equipment throughout the hospital from one plant monitoring system. All equipment HMI panels have a full alarm history log incorporated into the software meaning it is much easier to fault find.
Moreover, the Plant Monitoring System's remote access capabilities mean that Engineers can monitor and control their systems from virtually anywhere. Whether using a mobile phone or a computer, they can receive real-time updates, adjust settings, and respond to alerts promptly, ensuring that the medical gas equipment operates smoothly and safely.
In summary, the Athena Plant Monitoring System is an indispensable tool for Engineers and managers, providing comprehensive oversight and control of medical gas equipment. Its integration with various plant room components, coupled with its remote access capabilities, ensures that managers can maintain optimal performance and safety, no matter where they are.
The following Medical Gas Equipment can all be Viewed Via the Plant Monitoring System.
(Medical Vacuum Plant Range)
(Medical Air Plant Range)
(Duplex AGSS Plant)
(Automatic Manifold)
Key Features
- HMI Touchscreen panel
- Alarm history log incorporated into software of the Plant & Manifolds etc HMI panel
- Plant fault conditions can be seen instantly
- Each monitoring system can be linked to an unlimited amount of MMPLs equipment
- Up to 12 screens can be seen at one time.
- Screens can be mixture of air plants, vacuum plants, manifolds etc.
- Each central panel can be repeated to another panel.
- Each screen is password protected.
- Compatible with all gases.
- 12 Months guarantee.
- Each piece of equipment can be linked and named to suit its location / ward.
Standard Specification
Medical Gas Alarm Athena
Millennium Medical Products Limited has designed and manufactured a product unique within the medical gas industry, the Athena Medical gas alarm looks like traditional Medical gas alarms but has the added features of displaying the pressure or vacuum it is monitoring in the pipeline using line monitored transducers.
The Athena Medical Gas Alarm can monitor up to 6 Gases in one panel with two fault conditions and one pressure display per Gas, this can be repeated to as many other panels as required using only two wire communication. The Alarm can also be connected to the Hospital BMS System via two terminals for any fault condition or via a computer interface panel for every fault condition, the Computer interface panel is the ideal solution for connecting to Operating Theatre Panels.
Key Features
- Complies fully with all relevent standards
- Support for 1 to 6 individually monitored gases
- Transducer Extender Separate threshold alarms for over and under pressure
- Visual display of current pressure on each monitored gas
- Capable of communicating with a Remote Slave Alarm
- Has the capability of communicating with operating theatre panel or hospital BMS system via computer interface panel
- Has the capability to have transducers mounted in the Zone Service Unit and alarm mounted separately via transducer extender panel.
- Available in surface or flush mounted options
- Only alarm to incorporate end of line monitoring
- No adjustment of pressure switches necessary
- Custom Logos are available subject to minimum order quantities
- Fully tested and certified prior to dispatch
- Available as a stand alone unit or integral with our CENTURION range of Zone Service Units
Standard Specification
Centurion 2000 ZSU
Zone Service Unit Centurion 2000 is a highly configurable and reliable solution to monitoring, isolating and delivering medical gas services in a critical care environment.
By combining the Centurion 2000 with the Athena Area Digital Alarm MMPL has eliminated nuisance call outs which frequently occur due too drifting pressure switches, Highly configurable and designed for maximum reliability and ease of use Centurion 2000 is the first choice solution from MMPL for Zone Applications.
Key Features
- Fully HTM 02-01 compliant
- Configurable from 1 to 6 gases (including duel systems)
- All valves are fitted with BS 739 NIST connectors
- Can be used with standard pipework sizes from 22 - 42mm
- Available as surface mount or part recessed unit
- Can be supplied without pressure switches or transducers (Departmental)
- Can be supplied with pressure switches or transducers only (for use with remote Alarm Panel)
- Can be supplied complete with alarm
- All makes of Local Alarm Panel can be fitted
- Fully removable front cover for ease of installation and maintenance
- Includes all internal pipework and stubbed external connections for easy installation
- Pressure and electrical tested prior to shipment
Standard Specification
Arcumed Bedhead Trunking
ARCUMED Bed Head Trunking provides a simple and easy to install solution for delivering medical gas and electrical services to the patient environment.
As with all of our products ARCUMED is hand assembled and tested at our factory in Greater Manchester.
Key Features
- Fully HTM 02-01 compliant
- Configurable from 1 to 6 gases
- Any make of TU can be fitted
- Any type of electrical sockets can be fitted
- Nurse Call, Bed Lights and Angle Poise Lights can be fitted if required
- Electrically pre-wired for ease of installation
- Pre-piped with inert gas soldered medical copper tube
- Fully removable, hinged covers for easy fitting and maintenance
- Pressure and electrical tested prior to shipment
Nightingale Headwall
NIGHTINGALE Headwall Units provides a simple and easy to install solution for delivering gas and electrical services to the patient environment.
As with all of our products Nightingale is hand assembled and tested at our factory in Greater Manchester.
Key Features
- Fully HTM 02-01 compliant
- Configurable from 1 to 6 gases
- Any make of TU can be fitted
- Can accommodate upto 8 electrical sockets
- Nurse Call, Bed Lights and Angle Poise Lights can be fitted
- Electrically pre-wired for ease of installation
- Pre-piped with inert gas soldered medical copper tube
- Fully removable covers for easy fitting and maintenance
- Pressure and electrical tested prior to shipment
- Each unit can be custom built to exact customer specifications
Mini Pendant
Millennium Medical Products Limited produces and supplies a full range of Pendants to meet exacting requirements.
All systems are manufactured to HTM 02-01 specifications, are factory tested prior to dispatch and come with a comprehensive warranty.
Key Features
- Fully HTM 02-01 compliant
- Sturdy Monocoque design
- Supports up to 4 gas and 4 power outlets
- Mini Pendants are available in different lengths to suit specific requirements
- All gases are equipped with BS 739 NIST hoses for easy installation
- Fully electrically and pressure tested in the factory prior to dispatch
Rigid Pendant
Millennium Medical Products Limited produces and supplies a full range of Pendants to meet exacting requirements.
All systems are manufactured to HTM 02-01 specifications, are factory tested for pressure and electrical safety prior to dispatch and come with a comprehensive warranty.
Key Features
- Fully HTM 02-01 compliant
- Sturdy Monocoque design
- Midi Pendants are available in different lengths to suit specific requirements
- Midi Pendant supports upto 9 Gases Supa Midi supports upto 12 Gases
- All gases are equipped with BS 739 NIST hoses for easy installation
- Can support Power Sockets standard and Blue MEIGaN plus Earth Jacks
- Data Sockets, Nurse call, AGSS Remote Control units can be fitted at Customers request
- Fully electrically and pressure tested in the factory prior to dispatch
Retractable Pendant
Millennium Medical Products Limited produces and supplies a full range of Pendants to meet exacting requirements.
All systems are manufactured to HTM 02-01 specifications, are factory tested for pressure and electrical safety prior to dispatch and come with a comprehensive warranty.
Key Features
- Fully HTM 02-01 compliant
- Sturdy Monocoque design
- Maxi Pendants are adjustable in length by upto 300mm
- Maxi Pendants are available in different lengths to suit specific requirements
- Can support Power Sockets standard and Blue MEIGaN plus Earth Jacks
- Data Sockets, Nurse call, AGSS Remote Control units can be fitted at Customers request
- Maxi Pendant supports upto 9 Gases Supa Maxi supports upto 12 Gases
- All gases are equipped with BS 739 NIST hoses for easy installation
- Fully electrically and pressure tested in the factory prior to dispatch
Flexi Pendant
Millennium Medical Products Limited produces and supplies a full range of Pendants to meet exacting requirements.
All Pendants are manufactured to HTM 02-01 specifications and are factory pressure tested prior to dispatch.
Standard configurations with up to 6 gases or 5 gases plus AGSS are available.
Key Features
- Compatible with HTM 02-01
- Pressure tested prior to dispatch
- All connections are fitted with BS 739 NIST hoses for easy installation
- First Fix plate and hex NIST can be supplied before pendant if required
Pendant Technical Data
Medical Gas Manifolds
The management of medical gas systems is crucial in healthcare facilities, ensuring a reliable supply of essential gases. Central to this infrastructure are Medical Gas Manifolds, which play a pivotal role in distributing gases like oxygen, nitrous oxide, and medical air. These manifolds come in various types, including Automatic Manifolds and Manual Manifolds, each serving specific operational needs.
Automatic Manifolds are designed for seamless gas supply, automatically switching between primary and secondary gas sources without manual intervention. This ensures a continuous supply, which is critical in medical settings. On the other hand, Manual Manifolds require manual switching, offering a straightforward and cost-effective solution for facilities where automatic switching is not necessary.
In compliance with standards such as HTM02-01, Emergency Reserve Manifolds (ERM) provide a backup gas supply in case of primary system failure. Similarly, HTM2022 Emergency Standby Manifolds (ESM) are designed to ensure that there is always a standby supply of medical gases, enhancing the reliability and safety of the gas distribution system.
Medical Gas Cylinders, connected to these manifolds via Tailpipes, are the primary storage units for medical gases. The integration of Human-Machine Interface (HMI) Controls allows for easy monitoring and management of the gas supply system. These controls provide real-time data and alerts, enabling quick responses to any issues that may arise.
The Athena Plant Monitoring System further enhances the management of medical gas systems. This advanced system offers comprehensive oversight, integrating with various components such as manifolds and HMI controls. It allows for real-time monitoring and control from any location, ensuring that site managers can maintain optimal performance and safety of the gas supply system.
In summary, the combination of Medical Gas Manifolds, both automatic and manual, along with emergency reserve and standby systems, ensures a reliable and safe supply of medical gases. The integration of advanced monitoring systems like the Athena Plant Monitoring System and HMI controls further enhances the efficiency and reliability of these critical systems.
Standard Specification
Automatic Manifolds
In the realm of healthcare, the seamless and reliable supply of medical gases is paramount. Central to this infrastructure are Automatic Manifolds, which ensure an uninterrupted flow of essential gases such as oxygen, Nitrous Oxide, Entonox, Medical Air, Carbon Dioxide and Nitrogen. These manifolds automatically switch between primary and secondary gas sources, maintaining a continuous supply without the need for manual intervention.
A critical component of this system is the HTM02-01 Emergency Reserve Manifold (ERM), which provides a backup gas supply in the event of a primary system failure. This redundancy is crucial for maintaining patient safety and ensuring that medical procedures can continue without interruption.
Medical Gas Cylinders serve as the primary storage units for these gases, connected to the manifold system via Tailpipes. These connections are secured to the Header rack via gas specific Non-Return Valve blocks (NRVs), which prevent backflow and ensure the integrity of the gas supply. Additionally, Heaters can be integrated into the system to maintain the optimal temperature of the gases, preventing condensation and ensuring consistent delivery.
The Medical Gas Terminal Unit Test Point is another vital component, allowing for regular testing and verification of the gas supply. This ensures that the system is functioning correctly and that the gas quality meets the required standards.
Human-Machine Interface (HMI) Controls play a significant role in the management of these systems. They provide real-time data and alerts, enabling healthcare professionals to monitor and manage the gas supply efficiently. These controls are user-friendly and facilitate quick responses to any issues that may arise.
The Athena Plant Monitoring System further enhances the oversight and management of medical gas systems. This advanced system integrates with the Automatic manifolds HMI controls, to provide comprehensive monitoring and control. It allows Hospital Engineers to access real-time data and manage the system from any location, ensuring optimal performance and safety.
In summary, the integration of Calistra Automatic Manifolds, HTM02-01 ERMs, Medical Gas Cylinders, and advanced monitoring systems like the Athena Plant Monitoring System ensures a reliable and efficient medical gas supply. This comprehensive approach enhances the safety and effectiveness of healthcare facilities, ultimately contributing to better patient care.
Key Features
- Fully HTM 2022 / HTM 02-01 compliant
- Fully Automatic Operation
- Fail Safe control system in case of power loss
- Touch Screen HMI Display
- Integral Transmitter
- BMS/Alarm outputs for Remote Status Indication
- Line Fault Monitoring for ERM and ESM backup manifolds wiring
- Available in 400kpa, 700kpa and 1000 kpa output capacities
Standard Specification
All of our Manifolds are built to the highest standards and offer the following specification as standard:
- Complies fully with all relevant standards
- Use two stage regulators for good flow characteristics
- Supplied with pre-set regulators and pressure sensors
- Utilize highly visible readouts for cylinder contents and pipeline pressure
- Tailpipe header blocks have integral non-return valves
- Includes safety relief and isolation valves
- Can be supplied as wall mounted or free standing / floor mounted variants
- Electrical connections are pre-wired to a termination box
- Custom built external cages
Emergency Reserve Manifold (ERM)
Millennium Medical Products provide a comprehensive range of Manifold systems and accessories that are all hand made at its factory in Greater Manchester.
All products are designed for reliablility, maximum usable lifespan and cost effectiveness. All products are supplied with a comprehensive warranty.
Key Features
- Fully HTM 02-01 compliant
- Uses 2 stage regulator for good flow characteristics
- Supplied with pre-set regulators and pressure sensors
- Uses highly visible readouts for cylinder contents and pipeline pressure
- Provides safety relief and isolation valves
- Can be supplied in wall or floor mounted variants
- Electrical connections pre-wired to a termination box
Emergency Standby Manifold (ESM)
Millennium Medical Products provide a comprehensive range of Manifold systems and accessories that are all hand made at its factory in Greater Manchester.
All products are designed for reliability, maximum usable lifespan and cost effectiveness. All products are supplied with a comprehensive warranty.
Key Features
- Fully HTM2022 compliant
- Uses 2 stage regulator for good flow characteristics
- Supplied with pre-set regulator and pressure switch
- Uses highly visible gauges for cylinder contents and pipeline pressure
- Provided with safety relief valve isolation valve
- Supplied as standard wall mounted or floor mounted option available
- Electrical connections pre-wired to a termination box
Portable ESM Unit
Millennium Medical Products provide a comprehensive range of Manifold systems and accessories that are all hand made at its factory in Greater Manchester.
The Portable ESM unit is designed to safely and rapidly transport two cylinders anywhere in the hospital with the minimum of effort.
Key Features
- Fully HTM 2022 / HTM 02-01 compliant
- Robust steel construction
- Two stage pre-set regulators are used giving good flow characteristics
- Highly visible gauges for cylinder contents and pipeline pressure
- Removable tailpipes for easy transportation
- Gas specific hose connector included
- Fully tested prior to dispatch
Regulators Replacements
Millennium Medical Product Limited offer a full range of replacement Regulators which are all Medical devices classified as class IIb according to the Medical Device Directive 93/42/EEC.
The Regulators are used in Automatic Manifolds, Emergency Standby Manifolds (ESM) to HTM2022 and Emergency Reserve Manifolds (ERM) to HTM02-01 for the supply Medical Gases to Patients and Equipment throughout the Hospital.
Key Features
- Selection is easy, match your Regulator with one of the small photos to obtain the type and Part Number
- The Regulators are Factory set in accordance with the Part Number
- Only Personnel with proper product training should attempt to change Regulators
- No Oil or Grease should be used on Regulators (especially be careful when using hand creams)
- It is not recommended to strip Regulators on site special tools and equipment are used during assembly
- Entonox Regulators should be replaced every two years all other Gases every five years
Tail Pipe Replacements
Millennium Medical Products provide a comprehensive range of Manifold systems and accessories that are all hand made at its factory in Greater Manchester.
When used with a Compact Manifold the double tail pipe allows the connection of 2 cylinders per side doubling the capacity of the Manifold system in a very cost effective way.
Key Features
- Fully HTM 2022 / HTM 02-01 compliant
- Cost effecive means of doubling system capacity
Racking
Millennium Medical Products provide a comprehensive range of cylinder storage and support racking systems.
All systems are made to order out of hard wearing Galvanized Steel. Any specific customer requirements can be accommodated.
Key Features
- Made to order to customer specifications
- Horizontal and Vertical solutions available
- Hard wearing galvanized finish
- Full range of cylinder types are catered for
Duplex AGSS Plant
Duplex AGSS Plant Millennium Medical Products Limited produces a complete range of Duplex systems to British Standard HTM02-01. They start with a small flow rate of 260l/m to any size to suit customers requirement. AGSS Plants are manufactured in accordance with Quality Management System BS EN 13485 for medical devices. AGSS Plants are used to extract gases and aerosolized medication from operating rooms, which have been exhaled from the patient to the outside of the hospital. protecting operating room Staff from long term exposure to these harmful substances.
In the UK to maintain a safe workplace within the Operating room, Occupational Health Set the maximum limit exposure to potentially harmful gases as follows.
Nitrous Oxide 100ppm
Halogenated volatile anaesthetic agents 50ppm
If Halothane is used 10ppm.
The MMPL Duplex AGSS Plant is very easy to install. All plants have one inlet and one exhaust reducing the cost of installation. The inlet and outlet have flexible hose connections to reduce the transmission of noise down the pipework. They require one Electrical Supply. Either Single Phase Neutral and Earth or Three Phase Neutral and Earth. Our Latest Duplex AGSS plants, have a HMI Control System (Human-Machine Interface) which is integrated to enhance operational efficiency and user interaction. This system allows healthcare professionals to monitor and control the AGSS plant with ease, ensuring optimal performance and quick response to any issues. This can be connected to our comprehensive Athena Plant Monitoring System which is essential for maintaining the reliability and safety of the Duplex AGSS Plant. This system continuously monitors the performance of the AGSS pumps and other components, alerting staff to any potential issues before they become critical. In addition up to 9 24VAC remote control units can be installed in the operating rooms to control the Plant. This will require an additional 6 core control cable which can be linked in series to each remote control unit. If more than 9 remotes are required a booster can be purchased.
As Standard each Plant is fitted with a balance Valve. The balance valve allows the pump to maintain a pressure of 125mbar when the flow changes within the system. The balance valve is protected from dirt and airborne particles by an Ingress Filter.
MMPL can offer complete systems which consists of AGSS Plant - Terminal Unit - Air Break - Patient Mask. https://www.mmpl.uk.com/products/agss-plant/air-brake-tu/
MMPL can also offer custom built external weather proof housing. https://www.mmpl.uk.com/products/agss-plant/external-enclosures/
Key Features
- Fully compliant with HTM 02-01
- Tested prior to dispatch
- Single and 3 Phase options
- Stacked systems available
- Anti-vibration mounts fitted to pump units
- Alarm and BMS output connections on all models
- Flexible connections and copper pipeline connections supplies on inlet and exhaust of all units
- Comprehensive Warranty
Options
- GS1001 Remote Control Unit can be supplied as an optional extra
Standard Specification
Simplex AGSS Plant
Simplex AGSS Plant
Millennium Medical Products Limited produces a complete range of simplex systems to British Standard HTM02-01. They start with a small flow rate of 260l/m to any size to suit customers requirement. AGSS Plants are manufactured in accordance with Quality Management System BS EN 13485 for medical devices. AGSS Plants are used to extract gases and aerosolized medication from operating rooms, which have been exhaled from the patient to the outside of the hospital. protecting operating room Staff from long term exposure to these harmful substances.
In the UK to maintain a safe workplace within the Operating room, Occupational Health Set the maximum limit exposure to potentially harmful gases as follows.
Nitrous Oxide 100ppm
Halogenated volatile anaesthetic agents 50ppm
If Halothane is used 10ppm.
The MMPL Simplex AGSS Plant is very easy to install. All plants have one inlet and one exhaust reducing the cost of installation. The inlet and outlet have flexible hose connections to reduce the transmission of noise down the pipework. They require one Electrical Supply. Either Single Phase Neutral and Earth or Three Phase Neutral and Earth. In addition upto 9 24VAC remote control units can be installed in the operating rooms to control the Plant. This will require an additional 5 core control cable which can be linked in series to each remote control unit. If more than 9 remotes are required a booster can be purchased.
As Standard each Plant is fitted with a balance Valve. The balance valve allows the pump to maintain a pressure of 125mbar when the flow changes within the system. The balance valve is protected from dirt and airborne particles by an Ingress Filter.
MMPL can offer complete systems which consists of AGSS Plant - Terminal Unit - Air Break - Patient Mask. https://www.mmpl.uk.com/products/agss-plant/air-brake-tu/
MMPL can also offer custom built external weather proof housing. https://www.mmpl.uk.com/products/agss-plant/external-enclosures/
Key Features
- Fully compliant with HTM 02-01
- Tested prior to dispatch
- Single and 3 Phase option
- Anti-vibration mounts fitted to pump units
- Flexible connections and copper pipeline connections supplies on inlet and exhaust of all units
- Comprehensive Warranty
Options
- GS1001 Remote Control Unit can be supplied as an optional extra
Standard Specification
Air Brake & TU
Millennium Medical Products are proud to be able to supply equipment at all locations within the hospital environment from equipment room, through pipeline to patient delivery on the ward.
We provide a one-stop-shop for all of your needs.
Key Features
- Complies with HTM 02-01
- Supplied with all necessary hoses to connect between the TU, Air Brake and patients mask
- TU is supplied with copper pipeline connector
- Optional extras including wall, rail and machine mounting brackets and patient masks are also available.
Control Units
The AGSS Control Unit provides convenient and simple control of the plant and gives a clear visual indication of the plants operating status.
Key Features
- Simple on/off operation
- Colour coded lights provide immediate indication of the systems operational status
External Enclosures
Millennium Medical Products are able to supply a range of custom made enclosures. Shown above is an AGSS in a weatherproof enclosure.
Using external encosures frees up equipment room space and also allows the equipment to be located remotely where operating noise may be an issue.
Suitable for external mounting of AGSS, Manifold, Cylinder Storage etc.
Key Features
- Weatherproof
- Secure
- Durable
- Floor, wall and ceiling mount solutions are available
- Suitable for Simplex and Duplex Systems
- Available as cages or windowed enclosures
- Highly customisable - just ask us what we can do
Options
Medical Air Plant Range
Millennium Medical Products Limited manufactures and supplies a comprehensive range of Medical Air Plant Systems
Various configurations are available including, Duplex, Triplex, Quadruplex, Pentaplex and Hexaplex Medical Air Plants. Compressors can be Oil lubricated or Oil free Screw, Reciprocating or Scroll type. Fixed Speed or Variable Speed (VSD) For Greater Energy Efficiency.
Our state-of-the-art Medical Air Plants are meticulously designed to meet HTM02-01 standards and the European Pharmacopoeia. It features high-efficiency Compressors and a cutting edge Desiccant Dryer System to ensure a continuous supply of clean, dry air. The Medical Air Plant is equipped with an intuitive HMI Control System and can connect to a comprehensive Athena Plant Monitoring System. which is essential for maintaining the reliability and safety of the medical Air plant. This system continuously monitors the performance of the Compressors and other components, alerting staff to any potential issues before they become critical. This also allows for seamless operation and real-time monitoring via Smart Phone or Computer, ensuring optimal performance and compliance with stringent medical requirements. Our solution guarantees reliability and safety for all medical air supply needs.
Our Medical Air equipment is built to the highest standards of quality and come as standard with the following features:
System shown is a Pentaplex Plant with 5 x 37kw Atlas Copco Screw Compressors. - All interconnecting Pipework and wiring are included with each system.
- Flexible connections are provided for all Compressor pipework.
- Anti – vibration mounts are used on all Compressor units to minimize noise and wear.
- “Fail safe” Start up control system in event of power loss.
- Each machine is fitted with adjacent electrical isolator.
- Control panel fitted with HMI display with independent PLC Emergency Back up.
- Alarm and BMS outputs for remote status indication are provided.
- All sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Key Features
- Fully compliant to HTM 02-01 specification
- Flexible connections on compressor pipework
- Fail safe start up control system in the event of power loss
- Alarm and BMS outputs for remote status indication
- Anti vibration mounts on all compressors
- All plants certified and tested before dispatch
Standard Specification
Millennium Medical Products Limited provide a comprehensive range of Medical Air Plant systems and accessories for use throughout the hospital environment.
Like all of our products our Air Plant equipment is designed for reliability and maximum design life whilst being extremely cost effective to buy and requiring minimum maintenance. All MMPL products are hand assembled at our MMPL2 factory located in Hyde, Greater Manchester, UK and carry the EC Declaration of Conformity CE mark.
Hexaplex Medical Air Plant
Standard Specification
All of our Medical Air equipment is built to the highest standards of quality and come as standard with the following features:
Hexaplex Medical Air Plant to HTM02-01 Four Compressor after dryer losses sized to meet the Duty with the other two compressors as first and second standby.
- All interconnecting Pipework and wiring is included with each system.
- Flexible connections are provided for all compressor pipework.
- Anti – vibration mounts are used on all compressors to minimize noise and wear.
- “Fail safe” start up control system in event of power loss.
- (SHFM) Screw Hexaplex Floor Mounted all equipment is mounted on the floor.
- (SHC) Screw Hexaplex Compact compressors mounted on Vessels to reduce space.
- Control panels fitted with highly visible indicators and displays.
- Each compressor is fitted with adjacent electrical Isolator.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Pentaplex Medical Air Plant
Standard Specification
All of our Medical Air equipment is built to the highest standards of quality and come as standard with the following features:
Pentaplex Medical Air Plant to HTM02-01 Three Compressor after dryer losses sized to meet the Duty with the other two compressors as first and second standby.
- All interconnecting Pipework and wiring is included with each system.
- Flexible connections are provided for all compressor pipework.
- Anti – vibration mounts are used on all compressors to minimize noise and wear.
- “Fail safe” start up control system in event of power loss.
- (SPFM) Screw Pentaplex Floor Mounted all equipment is mounted on the floor.
- (SPC) Screw Pentaplex Compact compressors mounted on Vessels to reduce space.
- Control panels fitted with highly visible indicators and displays.
- Each compressor is fitted with adjacent electrical Isolator.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Quadruplex Medical Air Plant
Standard Specification
All of our Medical Air equipment is built to the highest standards of quality and come as standard with the following features:
Quadruplex Medical Air Plant to HTM02-01 Two Compressor after dryer losses sized to meet the Duty with the other two compressors as first and second standby.
Quadruplex Medical Air Plant to HTM2022 Three Compressors after dryer losses sized to meet the Duty with the forth compressor as standby
- All interconnecting Pipework and wiring is included with each system.
- Flexible connections are provided for all compressor pipework.
- Anti – vibration mounts are used on all compressors to minimize noise and wear.
- “Fail safe” start up control system in event of power loss.
- (SQFM) Screw Quadruplex Floor Mounted all equipment is mounted on the floor.
- (SQC) Screw Quadruplex Compact compressors mounted on Vessels to reduce space.
- Control panels fitted with highly visible indicators and displays.
- Each compressor is fitted with adjacent electrical Isolator.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Triplex Medical Air Plant
All of our Medical Air equipment is built to the highest standards of quality and come as standard with the following features:
- All interconnecting Pipework and wiring are included with each system.
- Flexible connections are provided for all compressor pipework.
- Anti – vibration mounts are used on all compressors to minimize noise and wear.
- “Fail safe” start up control system in event of power loss.
- (STFM) Screw Triplex Floor Mounted all equipment is mounted on the floor.
- (STC) Screw Triplex Compact compressors mounted on Vessels to reduce space.
- Control panels fitted with highly visible indicators and displays.
- Each compressor fitted with adjacent electrical Isolator.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Standard Specification
Triplex Medical Air Plant to HTM02-01 each Compressor after dryer losses sized to meet the Duty
Triplex Medical Air Plant to HTM2022 Two Compressors after dryer losses sized to meet the Duty with the 3rd compressor as standby
Duplex Medical Air Plant
All of our Medical Air equipment is built to the highest standards of quality and come as standard with the following features:
- All interconnecting Pipework and wiring are included with each system.
- Flexible connections are provided for all compressor pipework.
- Anti – vibration mounts are used on all compressors to minimize noise and wear.
- “Fail safe” start up control system in event of power loss.
- (SDFM) Screw Duplex Floor Mounted all equipment is mounted on the floor.
- (SDC) Screw Duplex Compact compressors mounted on Vessels to reduce space.
- Control panels fitted with highly visible indicators and displays.
- Each compressor fitted with adjacent electrical Isolator.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Standard Specification
Duplex Medical Air Plant to HTM02-01 and HTM2022 each Compressor after dryer losses sized to meet the Duty
Regulator Stations
Millennium Medical Products Limited produces and supplies a full range of Medical Gas Regulating Stations and accessories.
Standard Range from 1000L/M to 6000L/M over 6000L/ we can custom build to customers requirements.
All systems are manufactured to HTM 2022 and HTM 02-01 specifications and are factory tested prior to dispatch and come with a comprehensive warranty.
Product shown is a Duplex Regulator Station.
Key Features
- Fully compliant to specifications HTM 2022 (No NISTS) and HTM 02-01 (NISTS fitted)
- Simplex for surgical Air and Duplex for Medical Air are available
- Flat faced 'o' ring pipeline unions for easy installation and maintenance
- Includes gauges and pressure relief valves
- Standard Atmospheric discharge pressure relief valves for Medical Air
- For other gases Piped discharge pressure relief valves are available at an extra cost
- Pre set and pressure tested in the factory prior to dispatch
Air Treatment Accessories
Millennium Medical Products Limited produces and supplies a full range of Medical Air Plant systems and accesories.
All systems are manufactured to HTM 02-01 specifications are factory tested prior to dispatch and come with a comprehensive warranty.
Product shown is a Oil / Water Seperator Unit.
Key Features
- Conforms to the Water Resources Act 1991
- Works with Float, level and pneumatic drains
- Four 1/2" inlet ports
- Settling and Flotation Chamber
- Oil-Collection Vessel with Over Flow safeguard
- Test-Set with Check Glass and oil test
Medical Vacuum Plant Range
Millennium Medical Products Limited Medical Vacuum Plant is an essential component in healthcare facilities, providing a reliable source of vacuum for various medical applications. At the heart of this system are Rotary Vane Vacuum Pumps MMPL uses https://www.buschvacuum.com/uk/en/company/busch-uk/ which are known for their efficiency and durability. These pumps create the necessary vacuum pressure to support a range of medical procedures and equipment.
In our modern medical vacuum plants, an HMI Control System (Human-Machine Interface) is integrated to enhance operational efficiency and user interaction. This system allows healthcare professionals to monitor and control the vacuum plant with ease, ensuring optimal performance and quick response to any issues.
The vacuum plant serves critical areas such as Surgical Departments and Ward Areas, where a consistent and reliable vacuum supply is crucial. In surgical departments, the vacuum system is used for procedures that require suction, such as removing fluids and debris from the surgical site. In ward areas, it supports patient care by providing vacuum for various medical devices.
A comprehensive Athena Plant Monitoring System is essential for maintaining the reliability and safety of the medical vacuum plant. This system continuously monitors the performance of the vacuum pumps and other components, alerting staff to any potential issues before they become critical.
Medical Gas Terminal Unit Nemo XP are the points of use where the vacuum is accessed in the hospital. These units are usually equipped with Suction Control Devices that allow healthcare professionals to adjust the vacuum pressure according to the specific needs of the procedure or patient care activity.
To manage the fluids collected during medical procedures, Fluid collection jars are used. These jars are designed to safely collect and contain fluids, preventing contamination and ensuring a clean and sterile environment.
Overall, the integration of advanced technologies and reliable components in our medical vacuum plant ensures that healthcare facilities can provide high-quality care to their patients, maintaining safety and efficiency in critical medical environments.
Our Vacuum equipment is built to the highest standards of quality and come as standard with the following features:
- All interconnecting Pipework and wiring are included with each system.
- Flexible connections are provided for all pump pipework.
- Anti – vibration mounts are used on all pump units to minimize noise and wear.
- “Fail safe” Start up control system in event of power loss.
- Each machine is fitted with adjacent electrical isolator.
- Control panel fitted with HMI display with independent PLC Emergency Back up.
- Alarm and BMS outputs for remote status indication are provided.
- All sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Standard Specification
Hexaplex Medical Vacuum Plant
Standard Specification
All of our Vacuum equipment is built to the highest standards of quality and come as standard with the following features:
Hexaplex Vacuum Plant to HTM02-01 Four Pumps sized to meet the Duty with the 5th and 6th pump as 1st and 2nd standby
- All interconnecting Pipework and wiring is included with each system.
- Flexible connections are provided for all pump pipework.
- Anti – vibration mounts are used on all pump units to minimize noise and wear.
- “Fail safe” Start up control system in event of power loss.
- Each machine is fitted with adjacent electrical isolator.
- Control panel fitted with highly visible indicators and display.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Pentaplex Medical Vacuum Plant
Standard Specification
All of our Vacuum equipment is built to the highest standards of quality and come as standard with the following features:
Pentaplex Vacuum Plant to HTM02-01 Three Pumps sized to meet the Duty with the 4th and 5th pump as 1st and 2nd standby
- All interconnecting Pipework and wiring is included with each system.
- Flexible connections are provided for all pump pipework.
- Anti – vibration mounts are used on all pump units to minimize noise and wear.
- “Fail safe” Start up control system in event of power loss.
- Each machine is fitted with adjacent electrical isolator.
- Control panel fitted with highly visible indicators and display.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Quadruplex Vacuum Plant
Standard Specification
All of our Vacuum equipment is built to the highest standards of quality and come as standard with the following features:
Quadruplex Vacuum Plant to HTM02-01 Two Pump sized to meet the Duty with the 3rd and 4th pump as 1st and 2nd standby
Quadruplex Vacuum Plant to HTM2022 Three Pumps sized to meet the Duty with the 4th pump as standby
- All interconnecting Pipework and wiring is included with each system.
- Flexible connections are provided for all pump pipework.
- Anti – vibration mounts are used on all pump units to minimize noise and wear.
- “Fail safe” Start up control system in event of power loss.
- Each machine is fitted with adjacent electrical isolator.
- Control panel fitted with highly visible indicators and display.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Triplex Vacuum Plant
Standard Specification
All of our Vacuum equipment is built to the highest standards of quality and come as standard with the following features:
Triplex Vacuum Plant to HTM02-01 each Pump sized to meet the Duty
Triplex Vacuum Plant to HTM2022 Two Pumps sized to meet the Duty with the 3rd pump as standby
- All interconnecting Pipework and wiring is included with each system.
- Flexible connections are provided for all pump pipework.
- Anti – vibration mounts are used on all pump units to minimize noise and wear.
- “Fail safe” Start up control system in event of power loss.
- Each machine is fitted with adjacent electrical isolator.
- Control panel fitted with highly visible indicators and display.
- Alarm and BMS outputs for remote status indication are provided.
- All pressure switches and sensors are factory set for ease of installation.
- All plants are fully tested and certified before being despatched.
- Each plant is covered by a full warranty.
Duplex Vacuum Plant
Simplex Vacuum Plant
Dental Vacuum Plant
Millennium Medical Products Limited produces and supplies a full range of Vacuum Systems.
All Dental Vacuum systems are manufactured to HTM 02-01 / HTM 2022 specifications as appropriate, are factory tested prior to dispatch and come with a comprehensive warranty.
Product shown is a Quadruplex Dental Vacuum Plant.
Key Features
- Fully HTM 2022 compliant
- Simplex, Duplex, Triplex and Quadruplex solutions
- Alarm and BMS outputs for remote status indication are provided
- Anti-vibration mounts are fitted to all pump units to minimise noise and wear
- Optionally available with power efficient VSD Pump units to reduce operational costs.
- Pressure sensors and switches are pre-set at the factory for ease of installation
Test Units
Millennium Medical Products provide a comprehensive range of Test Equpiment for all aspects of installation and maintenance activities.
Key Features
- Full range of TU and NIST test units are available
- Uses include Pressure Testing, Purging and Gas Feeding
- Analogue gauges supplied as standard (Digital option available)
- Fitted with tamper proof locking device
- 3/8" cone seat for connection to gas source
TU All Gas Flow Jets
Key Features
- Used for fl ow testing when fi tted with an AMAL jet.
- Available with 1BA or 1/8” BSP port.
- Full range of jets available.
Digital Gauge - Option
Millennium Medical Products provide a comprehensive range of Test Equpiment for all aspects of installation and maintenance activities.
Digital Gauges can be supplied as an option to all of our test units.
Key Features
- Pressure reading is accurate to within 0.1% at temperatures within the range 0 - 50 degrees centigrade
- Pressure updates twice a second giving an immediate indication of leaks
- Reduces test time for pipeline pressure testing as leaks are immediately visible
- Standard working range - 1 to 30 bar
NIST Test Units
Key Features
- NIST Test Unit for use on pipeline installations and commissioning
- Uses include pressure testing, purging and gas feeding
- Fitted with tamper proof locking device
- 3/8” cone seat for connection to gas source
- Pressure, tightness and calibration is tested prior to despatch
Emergency Kit
Millennium Medical Products provide a comprehensive range of Test Equipment for use in installation, commissioning and maintenance activities.
Key Features
- The Emergency Kit comprises of a regulator and gas hose to allow the final line of supply to pipeline in case of failure.
Anti Confusion Probes
Millennium Medical Products provide a comprehensive range of Test Equipment for use in installation, commissioning and maintenance activities.
Key Features
- Full range of TU and NIST anti confusion probes are available
- Uses include checking the operation of terminal units and non-interchangability checking for gas specificy
Hoses and Tapes
Millennium Medical Products provide a comprehensive range of Tapes and Anti Static Hoses
Key Features
Hose:
- Carbon Core ensures that Static build up does not harm sensitive equipment
- Many sizes / colours available
Tape :
- Full range of Medical and Laboratory tapes are available
- All tapes conform to relevant standards HTM 02-01, BS 1710, BS4800 and BS 5252 as appropriate
- Medical tapes are 150mm wide
- Laboratory tapes are 50mm wide
Flow Meters
Millennium Medical Products Limited offers a full range of Medical Gas Flow Meters to suit every application.
All Flow Meters fully conform to the standard ISO15002 Flow metering devices for connection to terminal units of a Medical Gas Pipeline System.
Key Features
- Robust construction
- Anodized aluminium body
- Poly-carbonate inner and outer tube
- Calibrated to operate at 4 Bar
- Oxygen Hi-Flow 0-15 L/M or Lo-Flow 0.15-4.5 L/M available
- Med Air Hi-Flow 0-15 L/M or Lo-Flow 0.15-4.5 L/M available
- Available with Fixed BS Probe or 3/8" BSP connector
Options
- Humidifiers Disposable or Autoclave clean available
- Face Masks Adult and Pediatric available
- Nasal Cannula available
Suction Controllers
Millennium Medical Products Limited offers a full range of Medical Vacuum Suction Controllers to suit every application. Controllers can be fitted direct to Terminal Unit by BS Probe or remotely by 2 metre Vacuum hose and BS Probe.
High Vacuum Suction Units are used in Operating Theatres, Intensive Care Units, A&E Departments, Ward Areas. the controller can set the vacuum level between zero and the full vacuum pipeline.
Low Vacuum Suction Units are used in Pediatric departments, the controller can set the vacuum level between zero but not exceed (-150mmHg)
Thoracic Suction Units are used where Abdominal or Pleural cavity drainage is required, the controller can set the vacuum level between zero but not exceed (-53mmHg)
Mobile High Vacuum Suction Units
Mobile High Vacuum Suction Units are used in Operating Theatres, Intensive Care Units, A&E Departments, Ward Areas. the controller can set the vacuum level between zero and the full vacuum pipeline.
Key Features
- Suction Controller
- Disposable Bacterial Filter
- Safety Overflow Valve
- Two or Four Autoclave Clean Jars options available
- Each Jar 1800ml capacity
- Robust Construction
- Five Wheeled Stand for Extra Stability
Electric High Vacuum Suction Units
Electric High Vacuum Suction Units are great all-rounders for hospitals and outpatient clinics. They offer versatility, reliability and mobility, and are suitable for a wide range of high vacuum applications.
Key Features
- Electric High Vacuum Suction Units can be transported easily.
- Easy vacuum regulation making the Units ideal for bedside use.
- Low noise emission reduces disturbance in the operation room or at the patient’s bedside
- Rapid vacuum build up and allows precise regulation.
- Portable and Mobile Units Flow rate 26 l/m with a maximum Vacuum of 625mmHg
- Theatre Units Flow rate 45 l/m with a maximum Vacuum of 630mmHg
- Double Jar version has change over valve to allow operator to switch jars without interrupting suction
- Safety overflow valves and Disposable Bacterial Filters fitted as standard
Options
- Standard Units require 230V AC power supply other voltages available by request
- Available with single or double 1800ml Autoclave clean Jars
- Hydrophobic Filters can be fitted on request
Medical Copper Tubing
MMPL medical grade copper tube are pipeline solutions for medical installations. Degreased copper tubes and fittings are to relevant standards and are kite marked. The medical tubes are specifically designed for copper medical gas and vacuum systems. Medical copper tubes and medical fittings are suitable for all gas types
Medical grade degreased copper tube BS - Size range and details
| Diameter (mm) | Thickness (mm) | Length (m) |
|---|---|---|
| 12 | 0.6 | 6 |
| 15 | 0.7 | 3&6 |
| 22 | 0.9 | 3&6 |
| 28 | 0.9 | 3&6 |
| 35 | 1.0 | 6 |
| 42 | 1.0 | 6 |
| 54 | 1.0 | 6 |
| 67 | 1.2 | 6 |
| 76 | 1.5 | 6 |
| 108 | 1.5 | 6 |
| 133 | 1.5 | 6 |
| 159 | 2.0 | 6 |
| 219 | 3.0 | 6 |
Medical Copper Fittings
MMPL medical grade copper tube are pipeline solutions for medical installations. Degreased copper tubes and fittings are to relevant standards and are kite marked. The medical tubes are specifically designed for copper medical gas and vacuum systems. Medical copper tubes and medical fittings are suitable for all gas types
Medical grade degreased copper tube BS - Size range and details
| Diameter (mm) | Thickness (mm) | Length (m) |
|---|---|---|
| 12 | 0.6 | 6 |
| 15 | 0.7 | 3&6 |
| 22 | 0.9 | 3&6 |
| 28 | 0.9 | 3&6 |
| 35 | 1.0 | 6 |
| 42 | 1.0 | 6 |
| 54 | 1.0 | 6 |
| 67 | 1.2 | 6 |
| 76 | 1.5 | 6 |
| 108 | 1.5 | 6 |
| 133 | 1.5 | 6 |
| 159 | 2.0 | 6 |
| 219 | 3.0 | 6 |
Containerized Medical Gas Plantrooms
Millennium Medical Products Limited can supply a range of Containers from 10 to 40 foot which can be fitted out with a full range of Medical Gas Equipment.
These Transportable Plantrooms can be a temporary or permanent solution to a lack of accommodation within a hospitals facilities.
We can offer different options as listed below.
Key Features
- We can supply and fit equipment only
- We can supply and fit equipment including Pipework and Electrics
- As above with Air Conditioning for heating or cooling
- Choice of Colours
Millennium Medical Products
Unit 7 Catherine Street West,
Denton,
Manchester.
M34 3SY
Denton,
Manchester.
M34 3SY
Creditations
Quick Links
© Copyright 2024 Millennium Medical Products
